Program dat2nc, Version 2.0 <21 October 2004 09:45:00><MDT>

The start time is Wed Jun 01 12:47:03 2005 UTC.

Using parameter file I020921.par which specified:
  time source: micro
  project name: testnewproc
  nominal flight date: 2002/09/21
  aircraft: 43
  directory name for files: /home/abarryd//testnewproc/020921I/
  ADC file name: /home/abarryd/testnewproc/n43_hur02.adc
  keeping all of flight's slow data: True
  slow data source: file /home/abarryd/testnewproc/020921I.slw
  saving slow data as a raw slow data file: no
  writing data to a NetCDF file: yes
  writing data to a print out file (Green Bar Report): yes
  max bad slow records to read: 10000
  derive winds: yes, using attack angle/slip angle values:
    AAintercept 0.87511, AAslope 5.98502, SAintercept 0.35000, SAslope 7.25071
  making dynamicCorrections: yes for ambient temps and winds
  name of channel in ADC file for static pressure for the derived fields: psf
  name of channel in ADC file for dynamic pressure for the derived fields: pqf1

Warning! No ADC channel found matching  axbt1.
This will prevent saving this variable's values!

Warning! No ADC channel found matching  axbt2.
This will prevent saving this variable's values!

Warning! No ADC channel found matching  axbt3.
This will prevent saving this variable's values!

Warning! No ADC channel found matching  prt5_down.
This will prevent saving this variable's values!

Warning! No ADC channel found matching  prt5_side.
This will prevent saving this variable's values!

The ADC file "/home/abarryd/testnewproc/n43_hur02.adc" was read, then
the ADC list was written to an ASCII file and
to a PostScript file (with the system command "mpage").

aircraft_id:  43


Start Date/Time: 2002/09/21 164911
Time source: "micro"

Reading slow tape image from disk file
/home/abarryd/testnewproc/020921I.slw . . .


Raw disk file summary:
  12936000 bytes read
  equivalent to 2940 full tape records


Start Date/Time: 2002/09/21 164911; End Date/Time: 2002/09/22 005910

The data was read from the raw data file successfully.

The parameter file did not specify a date/time window so all
the valid slow data records that were read will be utilized.


Raw slow data will NOT be saved to a file.

Data written to a NetCDF file.
The Green Bar Report was written to the ASCII file
"/home/abarryd//testnewproc/020921I/020921I.list"
and to a PostScript file (with system command "mpage").

The end time is Wed Jun 01 12:47:17 2005 UTC.

Run time was 14 seconds.