apass.param !1 "APASS.PARAM" program apass<06-May-2003 10:38:46> micro !2 time source: micro, tcg1, tcg2, or gps /home/marty/project/ !3 top level directory (and possibly subdirectories) hur06 !4 Project name (will become subdirectory of dir in line 3) 2006/09/28 !5 nominal flight date: YYYY/MM/DD (will become YYMMDD) 42 !6 aircraft: 42 or 43(will become H or I & added to YYMMDD) /home/marty/project/adc/n42_hur06_03.adc !7: ADC constants file: either blank (use default name) or full file name full !8 "full": full flight or "YYYY/MM/DD HHMMSS YYYY/MM/DD HHMMSS" start/stop file /home/marty/project/hur06/060928H/060928H.slw !9 either "tape /dev/xxxx" or "file /xxx/yyy/zzz" for slow tape source SlowFile !10 either "SlowFile": to save slow data records as file or "noSlowFile" NetCDF !11 either "NetCDF": to save netCDF file or "noNetCDF" PrintOut !12 either "PrintOut": to save a "raw printout" file or "noPrintOut" 30 !13 used for "PrintOut", = 1,5,10,30,60: printout line every XX seconds 10000 !14 Max Bad Slow Records (to read before stopping reading) 2.29764 6.00460 0.10000 6.74543 !15 blank (no winds) or attAng inter, aa-slope, slipAng int, sa-slope DynamicCorrections !16 blank (for no) or "DynamicCorrections" or "NoDynamicCorrections" !17 blank (currently not used) !18 blank (currently not used) psf !19 static press chan FOR DERIVED calculations: "xyz" (name in ADC file) pqf1 !20 dynamic press chan FOR DERIVED calculations: "xyz"(name in ADC file) axbt1 !21 axbt chan 1: "xyz" (name used in ADC file) axbt2 !22 axbt chan 2: "xyz" (name used in ADC file) axbt3 !23 axbt chan 3: "xyz" (name used in ADC file) lwcjw !24 lwcjw chan: "xyz" (name used in ADC file) pdaf !25 pdaf: "xyz" (name used in ADC file) pdar !26 pdar: "xyz" (name used in ADC file) pdsf !27 pdsf: "xyz" (name used in ADC file) pdsr !28 pdsr: "xyz" (name used in ADC file) pqaf !29 pqaf: "xyz" (name used in ADC file) pqf1 !30 pqf1: "xyz" (name used in ADC file) pqf2 !31 pqf2: "xyz" (name used in ADC file) pqr !32 pqr: "xyz" (name used in ADC file) pqsf !33 pqsf: "xyz" (name used in ADC file) pqw !34 pqw: "xyz" (name used in ADC file) prt5_down !35 prt5_down: "xyz" (name used in ADC file) prt5_side !36 prt5_side: "xyz" (name used in ADC file) psf !37 psf: "xyz" (name used in ADC file) psw !38 psw: "xyz" (name used in ADC file) tdm1 !39 dew point measured chan 1: "xyz" (name used in ADC file) tdm2 !40 dew point measured chan 2: "xyz" (name used in ADC file) tdm3 !41 dew point measured chan 3: "xyz" (name used in ADC file) tt1 !42 total temperature chan 1: "xyz" (name used in ADC file) tt2 !43 total temperature chan 2: "xyz" (name used in ADC file) tt3 !tt3 !44 total temperature chan 3: "xyz" (name used in ADC file)