# Setup File for SFMR processing
# File consists of 5 sections, each with a preamble code
#   on the preceding line.  Codes and sections are:
#
# &A - Raw radiometer data file (%B,%T records)
# &B - Calibration file name; cal file in ProSensing sfmr3.cal format
# &C - Sea Surf Temp data base file name; file in mwir.rt format
# &D - SFMR Freqs in GHz - one line of 6 floating pt values
# &E - Default Sea Surf Temp in deg C
# &F - Std Dev threshold for Outlier filter
#
# Sections can be entered in any order.  User will be prompted for
#   missing sections.  Lines with a pound sign (#) are comments and
#   ignored.  File names must include directory, unless in the same
#   directory as Sfmr_main processing program.  See Get_Setupfile.ftni
#   code for more information.
#
# File for N43 cal mission on 5/27/2014 asg
#
&A - Data File
SFMR1405271925.dat
#
&B - Cal File
sfmr4.cfg
#
&C - SST file
mw_ir.fusion.2014.148.rt
#
&D - Freqs
# A zero value disables use of that frequency in the retrieval
4.74 5.31 5.57 6.02 6.69 7.09
#
&E - Default SST
# For a positive value, the program will use SSTs from the %A record
# A negative value tells the program to use SSTs from the file designated in &C above
# In either case, the default value below will be used for any missing values 
-25.9
#
&F - Outlier Filter Value
# A positive value tells the program to use the Linear (Least Squares) filter
# Negative value uses the Outlier (bubble sort) filter
# For a zero value, no filter is used.
4.0
#