Program 42_43dat2nc, Version 2.6 <8 September 2011 16:30:00> The start time is Wed Oct 19 19:44:26 2011 UTC. Using parameter file 20110724I1.par which specified: time source: micro project name: DORA nominal flight date: 2011/07/24 aircraft: 43 directory name for files: /home/data//DORA/20110724I1/ ADC file name: /home/data/DORA/n43_11v3.adc keeping all of flight's slow data: True slow data source: file /home/data/DORA/20110724I1/20110724I1.slw saving slow data as a raw slow data file: no writing data to a NetCDF file: yes writing data to a print out file (Green Bar Report): no max bad slow records to read: 10000 derive winds: yes, using attack angle/slip angle values: AAintercept 0.07939, AAslope 6.01526, SAintercept 0.30000, SAslope 7.15649 making dynamicCorrections: yes for ambient temps and winds name of channel in ADC file for static pressure for the derived fields: psf name of channel in ADC file for dynamic pressure for the derived fields: pqf1 Warning! No ADC channel found matching lwcjw. This will prevent saving this variable's values! The ADC file "/home/data/DORA/n43_11v3.adc" was read, then the ADC list was written to an ASCII file and to a PostScript file (with the system command "mpage"). aircraft_id: 43 Start Date/Time: 2011/07/24 165021 Time source: "micro" Reading slow tape image from disk file /home/data/DORA/20110724I1/20110724I1.slw . . . Raw disk file summary: 12372800 bytes read equivalent to 2812 full tape records Start Date/Time: 2011/07/24 165021; End Date/Time: 2011/07/25 003900 The data was read from the raw data file successfully. The parameter file did not specify a date/time window so all the valid slow data records that were read will be utilized. Raw slow data will NOT be saved to a file. Data written to a NetCDF file. Green Bar Report will NOT be written to a file. The end time is Wed Oct 19 19:44:43 2011 UTC. Run time was 17 seconds.