Program 42_43dat2nc, Version 2.6 <30 June 2011 15:30:00><EST>

The start time is Wed Aug 10 18:41:30 2011 UTC.

Using parameter file 20110723I1.par which specified:
  time source: micro
  project name: MET
  nominal flight date: 2011/07/23
  aircraft: 43
  directory name for files: /acdata/2011/MET/110723I/
  ADC file name: /acdata/adc/2011/n43_11v3.adc
  keeping all of flight's slow data: True
  slow data source: file /acdata/2011/MET/20110723I1/20110723I1.slw
  saving slow data as a raw slow data file: no
  writing data to a NetCDF file: yes
  writing data to a print out file (Green Bar Report): no
  max bad slow records to read: 10000
  derive winds: yes, using attack angle/slip angle values:
    AAintercept 0.07939, AAslope 6.01526, SAintercept 0.30000, SAslope 7.15649
  making dynamicCorrections: yes for ambient temps and winds
  name of channel in ADC file for static pressure for the derived fields: psf
  name of channel in ADC file for dynamic pressure for the derived fields: pqf1

Warning! No ADC channel found matching  lwcjw.
This will prevent saving this variable's values!

The ADC file "/acdata/adc/2011/n43_11v3.adc" was read, then
the ADC list was written to an ASCII file and
to a PostScript file (with the system command "mpage").

aircraft_id:  43


Start Date/Time: 2011/07/23 165101
Time source: "micro"

Reading slow tape image from disk file
/acdata/2011/MET/20110723I1/20110723I1.slw . . .


Raw disk file summary:
  12944800 bytes read
  equivalent to 2942 full tape records


Start Date/Time: 2011/07/23 165101; End Date/Time: 2011/07/24 010120

The data was read from the raw data file successfully.

The parameter file did not specify a date/time window so all
the valid slow data records that were read will be utilized.


Raw slow data will NOT be saved to a file.

Data written to a NetCDF file.

Green Bar Report will NOT be written to a file.

The end time is Wed Aug 10 18:41:44 2011 UTC.

Run time was 14 seconds.