Program 42_43dat2nc, Version 2.2 <20 May 2009 11:55:00> The start time is Tue May 31 12:39:50 2011 UTC. Using parameter file /acdata/2011/MET/20110527H1/110527H.par which specified: time source: micro project name: MET nominal flight date: 2011/05/27 aircraft: 42 directory name for files: /acdata/2011/MET/110527H/ ADC file name: /acdata/adc/2011/n42_11v3.adc keeping all of flight's slow data: True slow data source: file /acdata/2011/MET/20110527H1/110527H.slw saving slow data as a raw slow data file: no writing data to a NetCDF file: yes writing data to a print out file (Green Bar Report): no max bad slow records to read: 10000 derive winds: yes, using attack angle/slip angle values: AAintercept 2.35779, AAslope 6.29268, SAintercept 0.30000, SAslope 7.02545 making dynamicCorrections: yes for ambient temps and winds name of channel in ADC file for static pressure for the derived fields: psf name of channel in ADC file for dynamic pressure for the derived fields: pqf1 Warning! No ADC channel found matching tt3. This will prevent calculation of derived variable values! Warning! No ADC channel found matching lwcjw. This will prevent saving this variable's values! The ADC file "/acdata/adc/2011/n42_11v3.adc" was read, then the ADC list was written to an ASCII file and to a PostScript file (with the system command "mpage"). aircraft_id: 42 Start Date/Time: 2011/05/27 110441 Time source: "micro" Reading slow tape image from disk file /acdata/2011/MET/20110527H1/110527H.slw . . . Raw disk file summary: 6270000 bytes read equivalent to 1425 full tape records Start Date/Time: 2011/05/27 110441; End Date/Time: 2011/05/27 150210 The data was read from the raw data file successfully. The parameter file did not specify a date/time window so all the valid slow data records that were read will be utilized. Raw slow data will NOT be saved to a file. Data written to a NetCDF file. Green Bar Report will NOT be written to a file. The end time is Tue May 31 12:39:54 2011 UTC. Run time was 4 seconds.