Program 42_43dat2nc, Version 2.2 <20 May 2009 11:55:00><MDT>

The start time is Wed Jan 26 16:18:40 2011 UTC.

Using parameter file 20110124I1.par which specified:
  time source: micro
  project name: ow2011
  nominal flight date: 2011/01/24
  aircraft: 43
  directory name for files: /home/data/its/ow2011/110124I/
  ADC file name: /home/data/its/ow2011/n43_11owv1.adc
  keeping all of flight's slow data: True
  slow data source: file /home/data/its/ow2011/20110124I1/20110124I1.slw
  saving slow data as a raw slow data file: no
  writing data to a NetCDF file: yes
  writing data to a print out file (Green Bar Report): no
  max bad slow records to read: 10000
  derive winds: yes, using attack angle/slip angle values:
    AAintercept 0.07939, AAslope 6.01526, SAintercept 0.30000, SAslope 7.15649
  making dynamicCorrections: yes for ambient temps and winds
  name of channel in ADC file for static pressure for the derived fields: psf
  name of channel in ADC file for dynamic pressure for the derived fields: pqf1

The ADC file "/home/data/its/ow2011/n43_11owv1.adc" was read, then
the ADC list was written to an ASCII file and
to a PostScript file (with the system command "mpage").

aircraft_id:  43


Start Date/Time: 2011/01/24 140421
Time source: "micro"

Reading slow tape image from disk file
/home/data/its/ow2011/20110124I1/20110124I1.slw . . .
Missing data inbetween 2011/01/24 155500 and 2011/01/24 155508!

In readraw: routine checktime reported "BAD TAG".
(first byte of 440-byte one-sec block wasn't 8
or second byte wasn't 42 nor 43)
This bad record image will be ignored.
Missing data inbetween 2011/01/24 183820 and 2011/01/24 183829!

In readraw: routine checktime reported "BAD TAG".
(first byte of 440-byte one-sec block wasn't 8
or second byte wasn't 42 nor 43)
This bad record image will be ignored.


Raw disk file summary:
  12218800 bytes read
  equivalent to 2777 full tape records


Start Date/Time: 2011/01/24 140421; End Date/Time: 2011/01/24 214710

The data was read from the raw data file successfully.

The parameter file did not specify a date/time window so all
the valid slow data records that were read will be utilized.


Raw slow data will NOT be saved to a file.

1. Bad position at 14:46:52. Output as missing data
2. Bad position at 14:46:53. Output as missing data
3. Bad position at 14:46:54. Output as missing data
4. Bad position at 14:46:55. Output as missing data
5. Skipped time at 15:55:01. Output as missing data
6. Skipped time at 15:55:02. Output as missing data
7. Skipped time at 15:55:03. Output as missing data
8. Skipped time at 15:55:04. Output as missing data
9. Skipped time at 15:55:05. Output as missing data
10. Skipped time at 15:55:06. Output as missing data
11. Skipped time at 15:55:07. Output as missing data
12. Bad position at 15:55:08. Output as missing data
13. Skipped time at 18:38:21. Output as missing data
14. Skipped time at 18:38:22. Output as missing data
15. Skipped time at 18:38:23. Output as missing data
16. Skipped time at 18:38:24. Output as missing data
17. Skipped time at 18:38:25. Output as missing data
18. Skipped time at 18:38:26. Output as missing data
19. Skipped time at 18:38:27. Output as missing data
20. Skipped time at 18:38:28. Output as missing data
21. Bad position at 18:38:29. Output as missing data
Data written to a NetCDF file.

Green Bar Report will NOT be written to a file.

The end time is Wed Jan 26 16:19:37 2011 UTC.

Run time was 57 seconds.