Program ra_prodat42nc_2008, Version 2.0 <21 October 2004 09:45:00><MDT>


USE ONLY FOR P3 MISSIONS AFTER 1 JAN 2008 

The start time is Tue Nov 18 18:53:45 2008 UTC.

Using parameter file 080910H.par which specified:
  time source: micro
  project name: hur08
  nominal flight date: 2008/09/10
  aircraft: 42
  directory name for files: /acdata/2008/hur08/080910H/
  ADC file name: /acdata/adc/2008/n42_hur08v3.adc
  date/time window: 2008/09/10 200001 to 2008/09/11 033300
  slow data source: file /acdata/2008/hur08/080910H/080910H.slw
  saving slow data as a raw slow data file: no
  writing data to a NetCDF file: yes
  writing data to a print out file (Green Bar Report): no
  max bad slow records to read: 10000
  derive winds: yes, using attack angle/slip angle values:
    AAintercept 2.23090, AAslope 6.09209, SAintercept 0.35000, SAslope 7.27721
  making dynamicCorrections: yes for ambient temps and winds
  name of channel in ADC file for static pressure for the derived fields: psf
  name of channel in ADC file for dynamic pressure for the derived fields: pqf1

Warning! No ADC channel found matching  tt3.
This will prevent calculation of derived variable values!

The ADC file "/acdata/adc/2008/n42_hur08v3.adc" was read, then
the ADC list was written to an ASCII file and
to a PostScript file (with the system command "mpage").

Note: 64 physical record images were read from the disk file
which were skipped because there were problems in the records.
aircraft_id:  42


Start Date/Time: 2008/09/10 200001
Time source: "micro"

Reading slow tape image from disk file
/acdata/2008/hur08/080910H/080910H.slw . . .
Missing data inbetween 2008/09/10 200930 and 2008/09/10 200939!

In readraw: routine checktime reported "BAD TAG".
(first byte of 440-byte one-sec block wasn't 8
or second byte wasn't 42 nor 43)
This bad record image will be ignored.
Missing data inbetween 2008/09/11 005450 and 2008/09/11 005458!

In readraw: routine checktime reported "BAD TAG".
(first byte of 440-byte one-sec block wasn't 8
or second byte wasn't 42 nor 43)
This bad record image will be ignored.

The date/time just read 2008/09/11 033301 (using time source micro)
comes after your End date/time 2008/09/11 033300so reading of the slow data will stop.


Raw disk file summary:
  12245200 bytes read
  equivalent to 2783 full tape records


Start Date/Time: 2008/09/10 200001; End Date/Time: 2008/09/11 033301

The data was read from the raw data file successfully.


Raw slow data will NOT be saved to a file.

1. Skipped time at 20:09:31. Output as missing data
2. Skipped time at 20:09:32. Output as missing data
3. Skipped time at 20:09:33. Output as missing data
4. Skipped time at 20:09:34. Output as missing data
5. Skipped time at 20:09:35. Output as missing data
6. Skipped time at 20:09:36. Output as missing data
7. Skipped time at 20:09:37. Output as missing data
8. Skipped time at 20:09:38. Output as missing data
9. Bad position at 20:09:39. Output as missing data
10. Skipped time at 24:54:51. Output as missing data
11. Skipped time at 24:54:52. Output as missing data
12. Skipped time at 24:54:53. Output as missing data
13. Skipped time at 24:54:54. Output as missing data
14. Skipped time at 24:54:55. Output as missing data
15. Skipped time at 24:54:56. Output as missing data
16. Skipped time at 24:54:57. Output as missing data
17. Bad position at 24:54:58. Output as missing data
Data written to a NetCDF file.

Green Bar Report will NOT be written to a file.

The end time is Tue Nov 18 18:53:58 2008 UTC.

Run time was 13 seconds.