Program ra_n43dat2nc, Version 2.0 <21 October 2004 09:45:00><MDT>

The start time is Mon Aug 25 18:18:27 2008 UTC.

Using parameter file 080720I.par which specified:
  time source: micro
  project name: hur08
  nominal flight date: 2008/07/20
  aircraft: 43
  directory name for files: /acdata/2008/hur08/080720I/
  ADC file name: /acdata/adc/2008/n43_hur08.adc
  date/time window: 2008/07/20 195701 to 2008/07/21 050700
  slow data source: file /acdata/2008/hur08/080720I/080720I.slw
  saving slow data as a raw slow data file: no
  writing data to a NetCDF file: yes
  writing data to a print out file (Green Bar Report): no
  max bad slow records to read: 10000
  derive winds: yes, using attack angle/slip angle values:
    AAintercept 0.09448, AAslope 6.05627, SAintercept 0.15000, SAslope 7.17034
  making dynamicCorrections: yes for ambient temps and winds
  name of channel in ADC file for static pressure for the derived fields: psf
  name of channel in ADC file for dynamic pressure for the derived fields: pqf1

The ADC file "/acdata/adc/2008/n43_hur08.adc" was read, then
the ADC list was written to an ASCII file and
to a PostScript file (with the system command "mpage").

Note: 55 physical record images were read from the disk file
which were skipped because there were problems in the records.
aircraft_id:  43


Start Date/Time: 2008/07/20 195701
Time source: "micro"

Reading slow tape image from disk file
/acdata/2008/hur08/080720I/080720I.slw . . .

The date/time just read 2008/07/21 050701 (using time source micro)
comes after your End date/time 2008/07/21 050700so reading of the slow data will stop.


Raw disk file summary:
  14766400 bytes read
  equivalent to 3356 full tape records


Start Date/Time: 2008/07/20 195701; End Date/Time: 2008/07/21 050701

The data was read from the raw data file successfully.


Raw slow data will NOT be saved to a file.

ERROR:  String match to name in use

nc_def_var, ch[14].var - acci2
ERROR:  Variable not found

nc_put_att_text, ch[14].name
ERROR:  Variable not found

nc_put_att_text, ch[14].unit
ERROR:  Variable not found

nc_put_att_float, ch[14] mv
ERROR:  Variable not found

nc_put_att_float, ch[14] sr
ERROR:  Variable not found

nc_put_att_float, ch[14] or
ERROR:  Variable not found

nc_put_att_float, ch[14] vr
ERROR:  String match to name in use

nc_def_var, ch[15].var - acci1
ERROR:  Variable not found

nc_put_att_text, ch[15].name
ERROR:  Variable not found

nc_put_att_text, ch[15].unit
ERROR:  Variable not found

nc_put_att_float, ch[15] mv
ERROR:  Variable not found

nc_put_att_float, ch[15] sr
ERROR:  Variable not found

nc_put_att_float, ch[15] or
ERROR:  Variable not found

nc_put_att_float, ch[15] vr
1. Bad position at 20:41:41. Output as missing data
2. Bad position at 26:00:34. Output as missing data
3. Bad position at 26:00:35. Output as missing data
4. Bad position at 26:00:36. Output as missing data
5. Bad position at 26:00:37. Output as missing data
6. Bad position at 26:00:38. Output as missing data
7. Bad position at 26:37:57. Output as missing data
8. Bad position at 26:37:58. Output as missing data
ERROR:  Variable not found
(s)
ERROR:  Variable not found
(s)
Data written to a NetCDF file.

Green Bar Report will NOT be written to a file.

The end time is Mon Aug 25 18:19:18 2008 UTC.

Run time was 51 seconds.