Program /home/abarryd/testing/codetesting/n42_codetesting/ra_prodat42nc_2008, Version 2.0 <21 October 2004 09:45:00><MDT>


USE ONLY FOR P3 MISSIONS AFTER 1 JAN 2008 

The start time is Tue May 06 17:45:30 2008 UTC.

Using parameter file 080204H.par which specified:
  time source: micro
  project name: wsr08
  nominal flight date: 2008/02/04
  aircraft: 42
  directory name for files: /acdata/2008/wsr08/080204H/
  ADC file name: /home/acdata/adc/2008/n42_hur08v1.adc
  keeping all of flight's slow data: True
  slow data source: tape /dev/st0
  saving slow data as a raw slow data file: yes
  writing data to a NetCDF file: yes
  writing data to a print out file (Green Bar Report): no
  max bad slow records to read: 10000
  derive winds: yes, using attack angle/slip angle values:
    AAintercept 2.23090, AAslope 6.09209, SAintercept 0.35000, SAslope 7.27721
  making dynamicCorrections: yes for ambient temps and winds
  name of channel in ADC file for static pressure for the derived fields: psf
  name of channel in ADC file for dynamic pressure for the derived fields: pqf1

Warning! No ADC channel found matching  tt3.
This will prevent calculation of derived variable values!

The ADC file "/home/acdata/adc/2008/n42_hur08v1.adc" was read, then
the ADC list was written to an ASCII file and
to a PostScript file (with the system command "mpage").

aircraft_id:  42

Start Date/Time: 2008/02/04 180751Time source: "micro"
Reading tape /dev/st0 . . .

Magnetic Tape Summary:
 Physical records read: 37835
 Physical Slow records read: 3347 (14726800 bytes)

Start Date/Time: 2008/02/04 180751; End Date/Time: 2008/02/05 032540
The data was read from the DAT drive successfully.

The parameter file did not specify a date/time window so all
the valid slow data records that were read will be utilized.

The writing of the raw data was successful.

Data written to a NetCDF file.

Green Bar Report will NOT be written to a file.

The end time is Tue May 06 17:59:22 2008 UTC.

Run time was 832 seconds.