Program prodat2nc_cold, Version 2.0 <21 October 2004 09:45:00><MDT>

The start time is Wed Oct 10 13:48:18 2007 UTC.

Using parameter file /home/paulf/Desktop/acdata/hur07/070914H/070914H.par which specified:
  time source: micro
  project name: hur07
  nominal flight date: 2007/09/14
  aircraft: 42
  directory name for files: /home/paulf/Desktop/acdata/hur07/070914H/
  ADC file name: /home/paulf/Desktop/acdata/adc/2007/n42_hur07v3.adc
  keeping all of flight's slow data: True
  slow data source: file /home/paulf/Desktop/acdata/hur07/070914H/070914H.slw
  saving slow data as a raw slow data file: no
  writing data to a NetCDF file: yes
  writing data to a print out file (Green Bar Report): no
  max bad slow records to read: 10000
  derive winds: yes, using attack angle/slip angle values:
    AAintercept 2.23090, AAslope 6.09209, SAintercept 0.35000, SAslope 7.27721
  making dynamicCorrections: yes for ambient temps and winds
  name of channel in ADC file for static pressure for the derived fields: psf
  name of channel in ADC file for dynamic pressure for the derived fields: pqf1

Warning! No ADC channel found matching  tt3.
This will prevent calculation of derived variable values!

The ADC file "/home/paulf/Desktop/acdata/adc/2007/n42_hur07v3.adc" was read, then
the ADC list was written to an ASCII file and
to a PostScript file (with the system command "mpage").

aircraft_id:  42


Start Date/Time: 2007/09/14 071201
Time source: "micro"

Reading slow tape image from disk file
/home/paulf/Desktop/acdata/hur07/070914H/070914H.slw . . .
Missing data inbetween 2007/09/14 095942 and 2007/09/14 095944!

In readraw: routine checktime reported "BAD TAG".
(first byte of 440-byte one-sec block wasn't 8
or second byte wasn't 42 nor 43)
This bad record image will be ignored.


Raw disk file summary:
  14876400 bytes read
  equivalent to 3381 full tape records


Start Date/Time: 2007/09/14 071201; End Date/Time: 2007/09/14 163530

The data was read from the raw data file successfully.

The parameter file did not specify a date/time window so all
the valid slow data records that were read will be utilized.


Raw slow data will NOT be saved to a file.

1. Bad position at 09:55:41. Output as missing data
2. Bad position at 09:56:21. Output as missing data
3. Bad position at 09:59:39. Output as missing data
4. Bad position at 09:59:40. Output as missing data
5. Bad position at 09:59:41. Output as missing data
6. Bad position at 09:59:42. Output as missing data
7. Skipped time at 09:59:43. Output as missing data
8. Bad position at 09:59:44. Output as missing data
9. Bad position at 11:37:51. Output as missing data
Data written to a NetCDF file.

Green Bar Report will NOT be written to a file.

The end time is Wed Oct 10 13:48:44 2007 UTC.

Run time was 26 seconds.