Program prodat2nc, Version 2.0 <21 October 2004 09:45:00><MDT>

The start time is Tue Sep 11 14:07:03 2007 UTC.

Using parameter file /acdata/2007/hur07/070901H/070901H.par which specified:
  time source: micro
  project name: hur07
  nominal flight date: 2007/09/01
  aircraft: 42
  directory name for files: /acdata/2007//hur07/070901H/
  ADC file name: /acdata/adc/2007/n42_hur07v2.adc
  date/time window: 2007/09/01 194201 to 2007/09/02 033000
  slow data source: file /acdata/2007/hur07/070901H/070901H.slw
  saving slow data as a raw slow data file: no
  writing data to a NetCDF file: yes
  writing data to a print out file (Green Bar Report): no
  max bad slow records to read: 10000
  derive winds: yes, using attack angle/slip angle values:
    AAintercept 2.23090, AAslope 6.09209, SAintercept 0.35000, SAslope 7.27721
  making dynamicCorrections: yes for ambient temps and winds
  name of channel in ADC file for static pressure for the derived fields: psf
  name of channel in ADC file for dynamic pressure for the derived fields: pqf1

The ADC file "/acdata/adc/2007/n42_hur07v2.adc" was read, then
the ADC list was written to an ASCII file and
to a PostScript file (with the system command "mpage").

Note: 7 physical record images were read from the disk file
which were skipped because there were problems in the records.
aircraft_id:  42


Start Date/Time: 2007/09/01 194201
Time source: "micro"

Reading slow tape image from disk file
/acdata/2007/hur07/070901H/070901H.slw . . .
Dup time at 2007/09/02 011550

In readraw: routine checktime reported "BAD TAG".
(first byte of 440-byte one-sec block wasn't 8
or second byte wasn't 42 nor 43)
This bad record image will be ignored.
Dup time at 2007/09/02 011550

In readraw: routine checktime reported "BAD TAG".
(first byte of 440-byte one-sec block wasn't 8
or second byte wasn't 42 nor 43)
This bad record image will be ignored.
Missing data inbetween 2007/09/02 011550 and 2007/09/02 011553!

In readraw: routine checktime reported "BAD TAG".
(first byte of 440-byte one-sec block wasn't 8
or second byte wasn't 42 nor 43)
This bad record image will be ignored.
Missing data inbetween 2007/09/02 032150 and 2007/09/02 032203!

In readraw: routine checktime reported "BAD TAG".
(first byte of 440-byte one-sec block wasn't 8
or second byte wasn't 42 nor 43)
This bad record image will be ignored.

The date/time just read 2007/09/02 033001 (using time source micro)
comes after your End date/time 2007/09/02 033000so reading of the slow data will stop.


Raw disk file summary:
  12394800 bytes read
  equivalent to 2817 full tape records


Start Date/Time: 2007/09/01 194201; End Date/Time: 2007/09/02 033001

The data was read from the raw data file successfully.


Raw slow data will NOT be saved to a file.

1. Bad position at 23:48:31. Output as missing data
2. Bad position at 25:06:51. Output as missing data
3. Bad position at 25:08:01. Output as missing data
4. Bad position at 25:15:41. Output as missing data
5. Skipped time at 25:15:51. Output as missing data
6. Skipped time at 25:15:52. Output as missing data
7. Bad position at 25:16:21. Output as missing data
8. Bad position at 25:16:31. Output as missing data
9. Bad position at 25:49:51. Output as missing data
10. Bad position at 26:25:51. Output as missing data
11. Skipped time at 27:21:51. Output as missing data
12. Skipped time at 27:21:52. Output as missing data
13. Skipped time at 27:21:53. Output as missing data
14. Skipped time at 27:21:54. Output as missing data
15. Skipped time at 27:21:55. Output as missing data
16. Skipped time at 27:21:56. Output as missing data
17. Skipped time at 27:21:57. Output as missing data
18. Skipped time at 27:21:58. Output as missing data
19. Skipped time at 27:21:59. Output as missing data
20. Skipped time at 27:22:00. Output as missing data
21. Skipped time at 27:22:01. Output as missing data
22. Skipped time at 27:22:02. Output as missing data
Data written to a NetCDF file.

Green Bar Report will NOT be written to a file.

The end time is Tue Sep 11 14:07:39 2007 UTC.

Run time was 36 seconds.