Program prodat2nc_cold, Version 2.0 <21 October 2004 09:45:00><MDT>

The start time is Wed Jun 13 16:33:48 2007 UTC.

Using parameter file /home/paulf/Desktop/070612H/070612H.par which specified:
  time source: micro
  project name: Desktop
  nominal flight date: 2007/06/12
  aircraft: 42
  directory name for files: /home/paulf/Desktop/070612H/
  ADC file name: /home/acdata/adc/2007/n42_hur07v1.adc
  date/time window: 2007/06/12 115901 to 2007/06/12 184400
  slow data source: tape /dev/st0
  saving slow data as a raw slow data file: yes
  writing data to a NetCDF file: yes
  writing data to a print out file (Green Bar Report): no
  max bad slow records to read: 10000
  derive winds: yes, using attack angle/slip angle values:
    AAintercept 2.29764, AAslope 6.00460, SAintercept 0.10000, SAslope 6.74543
  making dynamicCorrections: yes for ambient temps and winds
  name of channel in ADC file for static pressure for the derived fields: psf
  name of channel in ADC file for dynamic pressure for the derived fields: pqf1

The ADC file "/home/acdata/adc/2007/n42_hur07v1.adc" was read, then
the ADC list was written to an ASCII file and
to a PostScript file (with the system command "mpage").

aircraft_id:  42

Start Date/Time: 2007/06/12 115901Time source: "micro"
Reading tape /dev/st0 . . .

The date/time just read 2007/06/12 184401 (using time source micro)
comes after your End date/time 2007/06/12 184400so reading of the slow data will stop.

Magnetic Tape Summary:
 Physical records read: 27260
 Physical Slow records read: 2476 (10894400 bytes)

Start Date/Time: 2007/06/12 115901; End Date/Time: 2007/06/12 184401
The data was read from the DAT drive successfully.

The writing of the raw data was successful.

Data written to a NetCDF file.

Green Bar Report will NOT be written to a file.

The end time is Wed Jun 13 16:44:51 2007 UTC.

Run time was 663 seconds.