Program dat2nc, Version 2.0 <21 October 2004 09:45:00> The start time is Mon Mar 05 19:01:57 2007 UTC. Using parameter file /acdata/2007/owinds/070208H/N42_owinds07.par which specified: time source: micro project name: owinds nominal flight date: 2007/02/08 aircraft: 42 directory name for files: /acdata/2007//owinds/070208H/ ADC file name: /acdata/adc/2007/N42_owinds07.adc date/time window: 2007/02/08 181900 to 2007/02/09 020000 slow data source: file /acdata/2007/owinds/070208H/070208H.slw saving slow data as a raw slow data file: no writing data to a NetCDF file: yes writing data to a print out file (Green Bar Report): no max bad slow records to read: 10000 derive winds: yes, using attack angle/slip angle values: AAintercept 2.29764, AAslope 6.00460, SAintercept 0.10000, SAslope 6.74543 making dynamicCorrections: yes for ambient temps and winds name of channel in ADC file for static pressure for the derived fields: psf name of channel in ADC file for dynamic pressure for the derived fields: pqf1 The ADC file "/acdata/adc/2007/N42_owinds07.adc" was read, then the ADC list was written to an ASCII file and to a PostScript file (with the system command "mpage"). Note: 66 physical record images were read from the disk file which were skipped because there were problems in the records. aircraft_id: 42 Start Date/Time: 2007/02/08 181901 Time source: "micro" Reading slow tape image from disk file /acdata/2007/owinds/070208H/070208H.slw . . . The date/time just read 2007/02/09 020001 (using time source micro) comes after your End date/time 2007/02/09 020000so reading of the slow data will stop. Raw disk file summary: 12465200 bytes read equivalent to 2833 full tape records Start Date/Time: 2007/02/08 181901; End Date/Time: 2007/02/09 020001 The data was read from the raw data file successfully. Raw slow data will NOT be saved to a file. Data written to a NetCDF file. Green Bar Report will NOT be written to a file. The end time is Mon Mar 05 19:02:25 2007 UTC. Run time was 28 seconds.