Program dat2nc_cold, Version 2.0 <21 October 2004 09:45:00><MDT>

The start time is Tue Nov 07 14:42:02 2006 UTC.

Using parameter file 061101I.par which specified:
  time source: micro
  project name: hur06
  nominal flight date: 2006/11/01
  aircraft: 43
  directory name for files: /home/marty/project//hur06/061101I/
  ADC file name: /home/marty/project/adc/n43_hur06_1.adc
  keeping all of flight's slow data: True
  slow data source: file /home/marty/project/hur06/061101I/061101I.slw
  saving slow data as a raw slow data file: yes
  writing data to a NetCDF file: yes
  writing data to a print out file (Green Bar Report): yes
  max bad slow records to read: 10000
  derive winds: yes, using attack angle/slip angle values:
    AAintercept 0.87511, AAslope 5.98502, SAintercept 0.35000, SAslope 7.25071
  making dynamicCorrections: yes for ambient temps and winds
  name of channel in ADC file for static pressure for the derived fields: psf
  name of channel in ADC file for dynamic pressure for the derived fields: pqf1

Warning! No ADC channel found matching  tt3.
This will prevent calculation of derived variable values!

Warning! No ADC channel found matching  tdm3.
This will prevent calculation of derived variable values!

The ADC file "/home/marty/project/adc/n43_hur06_1.adc" was read, then
the ADC list was written to an ASCII file and
to a PostScript file (with the system command "mpage").

aircraft_id:  43


Start Date/Time: 2006/11/01 161331
Time source: "micro"

Reading slow tape image from disk file
/home/marty/project/hur06/061101I/061101I.slw . . .
Dup time at 2006/11/01 163213
Dup time at 2006/11/01 163213 followed by > 1s time gap: Add current data to 163214
Missing data inbetween 2006/11/01 163214 and 2006/11/01 163216!
Missing data inbetween 2006/11/01 163550 and 2006/11/01 163600!

In readraw: routine checktime reported "BAD TAG".
(first byte of 440-byte one-sec block wasn't 8
or second byte wasn't 42 nor 43)
This bad record image will be ignored.


Raw disk file summary:
  3564000 bytes read
  equivalent to 810 full tape records


Start Date/Time: 2006/11/01 161331; End Date/Time: 2006/11/01 182830

The data was read from the raw data file successfully.

The parameter file did not specify a date/time window so all
the valid slow data records that were read will be utilized.

The writing of the raw data was successful.

1. Bad position at 16:32:13. Output as missing data
2. Bad position at 16:32:14. Output as missing data
3. Skipped time at 16:32:15. Output as missing data
4. Bad position at 16:32:16. Output as missing data
5. Bad position at 16:32:17. Output as missing data
6. Bad position at 16:35:01. Output as missing data
7. Bad position at 16:35:02. Output as missing data
8. Bad position at 16:35:03. Output as missing data
9. Bad position at 16:35:04. Output as missing data
10. Skipped time at 16:35:51. Output as missing data
11. Skipped time at 16:35:52. Output as missing data
12. Skipped time at 16:35:53. Output as missing data
13. Skipped time at 16:35:54. Output as missing data
14. Skipped time at 16:35:55. Output as missing data
15. Skipped time at 16:35:56. Output as missing data
16. Skipped time at 16:35:57. Output as missing data
17. Skipped time at 16:35:58. Output as missing data
18. Skipped time at 16:35:59. Output as missing data
19. Bad position at 16:36:00. Output as missing data
Data written to a NetCDF file.
The Green Bar Report was written to the ASCII file
"/home/marty/project//hur06/061101I/061101I.list"
and to a PostScript file (with system command "mpage").

The end time is Tue Nov 07 14:42:14 2006 UTC.

Run time was 12 seconds.