Program dat2nc_cold, Version 2.0 <21 October 2004 09:45:00> The start time is Fri Mar 23 18:10:02 2007 UTC. Using parameter file /home/paulf/Desktop/TexAQS/061006I.par which specified: time source: micro project name: done nominal flight date: 2006/10/06 aircraft: 43 directory name for files: /home/paulf/Desktop/TexAQS/done/061006I/ ADC file name: /home/paulf/Desktop/TexAQS/n43_TexAQS2.adc date/time window: 2006/10/06 212301 to 2006/10/06 220300 slow data source: tape /dev/st0 saving slow data as a raw slow data file: no writing data to a NetCDF file: yes writing data to a print out file (Green Bar Report): yes max bad slow records to read: 10000 derive winds: yes, using attack angle/slip angle values: AAintercept 0.87511, AAslope 5.98502, SAintercept 0.35000, SAslope 7.25071 making dynamicCorrections: yes for ambient temps and winds name of channel in ADC file for static pressure for the derived fields: psf name of channel in ADC file for dynamic pressure for the derived fields: pqf1 The ADC file "/home/paulf/Desktop/TexAQS/n43_TexAQS2.adc" was read, then the ADC list was written to an ASCII file and to a PostScript file (with the system command "mpage"). aircraft_id: 43 Start Date/Time: 2006/10/06 212301Time source: "micro" Reading tape /dev/st0 . . . The date/time just read 2006/10/06 220301 (using time source micro) comes after your End date/time 2006/10/06 220300so reading of the slow data will stop. Magnetic Tape Summary: Physical records read: 2705 Physical Slow records read: 246 (1082400 bytes) Start Date/Time: 2006/10/06 212301; End Date/Time: 2006/10/06 220301 The data was read from the DAT drive successfully. Raw slow data will NOT be saved to a file. Data written to a NetCDF file. The Green Bar Report was written to the ASCII file "/home/paulf/Desktop/TexAQS/done/061006I/061006I.list" and to a PostScript file (with system command "mpage"). The end time is Fri Mar 23 18:11:28 2007 UTC. Run time was 86 seconds.