Program dat2nc_cold, Version 2.0 <21 October 2004 09:45:00> The start time is Thu Oct 26 17:06:19 2006 UTC. Using parameter file /home/paulf/Desktop/TexAQS/060927I/060927I.par which specified: time source: micro project name: TexAQS nominal flight date: 2006/09/27 aircraft: 43 directory name for files: /home/paulf/Desktop/TexAQS/060927I/ ADC file name: /home/paulf/Desktop/TexAQS/n43_TexAQS2.adc date/time window: 2006/09/27 184201 to 2006/09/27 235600 slow data source: file /home/paulf/Desktop/TexAQS/060927I/060927I.slw saving slow data as a raw slow data file: no writing data to a NetCDF file: yes writing data to a print out file (Green Bar Report): yes max bad slow records to read: 10000 derive winds: yes, using attack angle/slip angle values: AAintercept 0.87511, AAslope 5.98502, SAintercept 0.35000, SAslope 7.25071 making dynamicCorrections: yes for ambient temps and winds name of channel in ADC file for static pressure for the derived fields: psf name of channel in ADC file for dynamic pressure for the derived fields: pqf1 The ADC file "/home/paulf/Desktop/TexAQS/n43_TexAQS2.adc" was read, then the ADC list was written to an ASCII file and to a PostScript file (with the system command "mpage"). Note: 40 physical record images were read from the disk file which were skipped because there were problems in the records. aircraft_id: 43 Start Date/Time: 2006/09/27 184201 Time source: "micro" Reading slow tape image from disk file /home/paulf/Desktop/TexAQS/060927I/060927I.slw . . . Missing data inbetween 2006/09/27 225900 and 2006/09/27 225914! In readraw: routine checktime reported "BAD TAG". (first byte of 440-byte one-sec block wasn't 8 or second byte wasn't 42 nor 43) This bad record image will be ignored. The date/time just read 2006/09/27 235601 (using time source micro) comes after your End date/time 2006/09/27 235600so reading of the slow data will stop. Raw disk file summary: 8465600 bytes read equivalent to 1924 full tape records Start Date/Time: 2006/09/27 184201; End Date/Time: 2006/09/27 235601 The data was read from the raw data file successfully. Raw slow data will NOT be saved to a file. 1. Skipped time at 22:59:01. Output as missing data 2. Skipped time at 22:59:02. Output as missing data 3. Skipped time at 22:59:03. Output as missing data 4. Skipped time at 22:59:04. Output as missing data 5. Skipped time at 22:59:05. Output as missing data 6. Skipped time at 22:59:06. Output as missing data 7. Skipped time at 22:59:07. Output as missing data 8. Skipped time at 22:59:08. Output as missing data 9. Skipped time at 22:59:09. Output as missing data 10. Skipped time at 22:59:10. Output as missing data 11. Skipped time at 22:59:11. Output as missing data 12. Skipped time at 22:59:12. Output as missing data 13. Skipped time at 22:59:13. Output as missing data 14. Bad position at 22:59:14. Output as missing data Data written to a NetCDF file. The Green Bar Report was written to the ASCII file "/home/paulf/Desktop/TexAQS/060927I/060927I.list" and to a PostScript file (with system command "mpage"). The end time is Thu Oct 26 17:06:24 2006 UTC. Run time was 5 seconds.