Program dat2nc_cold, Version 2.0 <21 October 2004 09:45:00> The start time is Mon Sep 25 18:13:31 2006 UTC. Using parameter file 060922H.par which specified: time source: micro project name: hur06 nominal flight date: 2006/09/22 aircraft: 42 directory name for files: /home/marty/project//hur06/060922H/ ADC file name: /home/marty/project/adc/n42_hur06_02.adc keeping all of flight's slow data: True slow data source: file /home/marty/project/hur06/060922H/060922H.slw saving slow data as a raw slow data file: yes writing data to a NetCDF file: yes writing data to a print out file (Green Bar Report): yes max bad slow records to read: 10000 derive winds: yes, using attack angle/slip angle values: AAintercept 0.87511, AAslope 5.98502, SAintercept 0.35000, SAslope 7.25071 making dynamicCorrections: yes for ambient temps and winds name of channel in ADC file for static pressure for the derived fields: psf name of channel in ADC file for dynamic pressure for the derived fields: pqf1 The ADC file "/home/marty/project/adc/n42_hur06_02.adc" was read, then the ADC list was written to an ASCII file and to a PostScript file (with the system command "mpage"). aircraft_id: 42 Start Date/Time: 2006/09/22 134651 Time source: "micro" Reading slow tape image from disk file /home/marty/project/hur06/060922H/060922H.slw . . . Raw disk file summary: 9724000 bytes read equivalent to 2210 full tape records Start Date/Time: 2006/09/22 134651; End Date/Time: 2006/09/22 195510 The data was read from the raw data file successfully. The parameter file did not specify a date/time window so all the valid slow data records that were read will be utilized. The writing of the raw data was successful. Data written to a NetCDF file. The Green Bar Report was written to the ASCII file "/home/marty/project//hur06/060922H/060922H.list" and to a PostScript file (with system command "mpage"). The end time is Mon Sep 25 18:14:43 2006 UTC. Run time was 72 seconds.