Program apass, Version 2.0 <29-May-2003 11:07:47> The start time is Thu Sep 14 16:24:00 2006 UTC. Using parameter file /home/marty/project/hur06/060914H/060914H.par which specified: time source: micro project name: hur06 nominal flight date: 2006/09/14 aircraft: 42 directory name for files: /home/marty/project//hur06/060914H/ ADC file name: /home/marty/project/adc/n42_hur06_02.adc keeping all of flight's slow data: True slow data source: file /home/marty/project/hur06/060914H/060914H.slw saving slow data as a raw slow data file: yes writing data to a NetCDF file: yes writing data to a print out file (Green Bar Report): yes max bad slow records to read: 10000 derive winds: yes, using attack angle/slip angle values: AAintercept 0.87511, AAslope 5.98502, SAintercept 0.35000, SAslope 7.25071 making dynamicCorrections: yes for ambient temps and winds name of channel in ADC file for static pressure for the derived fields: psf name of channel in ADC file for dynamic pressure for the derived fields: pqf1 The ADC file "/home/marty/project/adc/n42_hur06_02.adc" was read, then the ADC list was written to an ASCII file and to a PostScript file (with the system command "mpage"). aircraft_id: 42 Start Date/Time: 2006/09/14 132727 Time source: "micro" Reading slow tape image from disk file /home/marty/project/hur06/060914H/060914H.slw . . . Raw disk file summary: 1774960 bytes read equivalent to 403 full tape records plus a PARTIAL tape record image Start Date/Time: 2006/09/14 132727; End Date/Time: 2006/09/14 143440 The data was read from the raw data file successfully. The parameter file did not specify a date/time window so all the valid slow data records that were read will be utilized. The writing of the raw data was successful. Data written to a NetCDF file. The Green Bar Report was written to the ASCII file "/home/marty/project//hur06/060914H/060914H.list" and to a PostScript file (with system command "mpage"). The end time is Thu Sep 14 16:24:02 2006 UTC. Run time was 2 seconds.