Program dat2nc_cold, Version 2.0 <21 October 2004 09:45:00> The start time is Thu Jul 27 22:21:49 2006 UTC. Using parameter file /home/marty/project/hur06/060727H/060727H.par which specified: time source: micro project name: hur06 nominal flight date: 2006/07/27 aircraft: 42 directory name for files: /home/marty/project//hur06/060727H/ ADC file name: /home/marty/project/adc/n42_hur06_02.adc keeping all of flight's slow data: True slow data source: file /home/marty/project/hur06/060727H/060727H.slw saving slow data as a raw slow data file: yes writing data to a NetCDF file: yes writing data to a print out file (Green Bar Report): yes max bad slow records to read: 10000 derive winds: yes, using attack angle/slip angle values: AAintercept 0.87511, AAslope 5.98502, SAintercept 0.35000, SAslope 7.25071 making dynamicCorrections: yes for ambient temps and winds name of channel in ADC file for static pressure for the derived fields: psf name of channel in ADC file for dynamic pressure for the derived fields: pqf1 The ADC file "/home/marty/project/adc/n42_hur06_02.adc" was read, then the ADC list was written to an ASCII file and to a PostScript file (with the system command "mpage"). aircraft_id: 42 Start Date/Time: 2006/07/27 122101 Time source: "micro" Reading slow tape image from disk file /home/marty/project/hur06/060727H/060727H.slw . . . Missing data inbetween 2006/07/27 182800 and 2006/07/27 182808! In readraw: routine checktime reported "BAD TAG". (first byte of 440-byte one-sec block wasn't 8 or second byte wasn't 42 nor 43) This bad record image will be ignored. Raw disk file summary: 14594800 bytes read equivalent to 3317 full tape records Start Date/Time: 2006/07/27 122101; End Date/Time: 2006/07/27 213350 The data was read from the raw data file successfully. The parameter file did not specify a date/time window so all the valid slow data records that were read will be utilized. The writing of the raw data was successful. 1. Skipped time at 18:28:01. Output as missing data 2. Skipped time at 18:28:02. Output as missing data 3. Skipped time at 18:28:03. Output as missing data 4. Skipped time at 18:28:04. Output as missing data 5. Skipped time at 18:28:05. Output as missing data 6. Skipped time at 18:28:06. Output as missing data 7. Skipped time at 18:28:07. Output as missing data 8. Bad position at 18:28:08. Output as missing data Data written to a NetCDF file. The Green Bar Report was written to the ASCII file "/home/marty/project//hur06/060727H/060727H.list" and to a PostScript file (with system command "mpage"). The end time is Thu Jul 27 22:23:33 2006 UTC. Run time was 104 seconds.