Program dat2nc_cold, Version 2.0 <21 October 2004 09:45:00><MDT>

The start time is Thu May 25 18:51:20 2006 UTC.

Using parameter file /home/marty/project/hur06/060525h/060525h.par which specified:
  time source: micro
  project name: hur06
  nominal flight date: 2006/05/25
  aircraft: 42
  directory name for files: /home/marty/project//hur06/060525H/
  ADC file name: /home/marty/project/adc/n42_hur06_01.adc
  keeping all of flight's slow data: True
  slow data source: file /home/marty/project/hur06/060525h/060525h.slw
  saving slow data as a raw slow data file: yes
  writing data to a NetCDF file: yes
  writing data to a print out file (Green Bar Report): yes
  max bad slow records to read: 10000
  derive winds: yes, using attack angle/slip angle values:
    AAintercept 0.87511, AAslope 5.98502, SAintercept 0.35000, SAslope 7.25071
  making dynamicCorrections: yes for ambient temps and winds
  name of channel in ADC file for static pressure for the derived fields: psf
  name of channel in ADC file for dynamic pressure for the derived fields: pqf1

The ADC file "/home/marty/project/adc/n42_hur06_01.adc" was read, then
the ADC list was written to an ASCII file and
to a PostScript file (with the system command "mpage").

aircraft_id:  42


Start Date/Time: 2006/05/25 124701
Time source: "micro"

Reading slow tape image from disk file
/home/marty/project/hur06/060525h/060525h.slw . . .


Raw disk file summary:
  5236000 bytes read
  equivalent to 1190 full tape records


Start Date/Time: 2006/05/25 124701; End Date/Time: 2006/05/25 160520

The data was read from the raw data file successfully.

The parameter file did not specify a date/time window so all
the valid slow data records that were read will be utilized.

The writing of the raw data was successful.

Data written to a NetCDF file.
The Green Bar Report was written to the ASCII file
"/home/marty/project//hur06/060525H/060525H.list"
and to a PostScript file (with system command "mpage").

The end time is Thu May 25 18:51:37 2006 UTC.

Run time was 17 seconds.