Program dat2nc_cold, Version 2.0 <21 October 2004 09:45:00><MDT>

The start time is Tue Feb 28 20:04:28 2006 UTC.

Using parameter file 060223H.par which specified:
  time source: micro
  project name: ocean_winds06
  nominal flight date: 2006/02/23
  aircraft: 42
  directory name for files: /acdata//ocean_winds06/060223H/
  ADC file name: /acdata/ocean_winds06/n42_ocwnds06.adc
  date/time window: 2006/02/23 225001 to 2006/02/24 050700
  slow data source: file /acdata/ocean_winds06/060223H.slw
  saving slow data as a raw slow data file: no
  writing data to a NetCDF file: yes
  writing data to a print out file (Green Bar Report): yes
  max bad slow records to read: 10000
  derive winds: yes, using attack angle/slip angle values:
    AAintercept 2.29764, AAslope 6.00460, SAintercept 0.10000, SAslope 6.74543
  making dynamicCorrections: yes for ambient temps and winds
  name of channel in ADC file for static pressure for the derived fields: psf
  name of channel in ADC file for dynamic pressure for the derived fields: pqf1

The ADC file "/acdata/ocean_winds06/n42_ocwnds06.adc" was read, then
the ADC list was written to an ASCII file and
to a PostScript file (with the system command "mpage").

Note: 78 physical record images were read from the disk file
which were skipped because there were problems in the records.
aircraft_id:  42


Start Date/Time: 2006/02/23 225001
Time source: "micro"

Reading slow tape image from disk file
/acdata/ocean_winds06/060223H.slw . . .

The date/time just read 2006/02/24 050701 (using time source micro)
comes after your End date/time 2006/02/24 050700so reading of the slow data will stop.


Raw disk file summary:
  10300400 bytes read
  equivalent to 2341 full tape records


Start Date/Time: 2006/02/23 225001; End Date/Time: 2006/02/24 050701

The data was read from the raw data file successfully.


Raw slow data will NOT be saved to a file.

Data written to a NetCDF file.
The Green Bar Report was written to the ASCII file
"/acdata//ocean_winds06/060223H/060223H.list"
and to a PostScript file (with system command "mpage").

The end time is Tue Feb 28 20:04:49 2006 UTC.

Run time was 21 seconds.