Program dat2nc_cold, Version 2.0 <21 October 2004 09:45:00><MDT>

The start time is Tue Feb 07 23:53:10 2006 UTC.

Using parameter file 060203H.par which specified:
  time source: micro
  project name: ocean_winds06
  nominal flight date: 2006/02/03
  aircraft: 42
  directory name for files: /acdata//ocean_winds06/060203H/
  ADC file name: /acdata/ocean_winds06/n42_ocwnds06.adc
  keeping all of flight's slow data: True
  slow data source: file /acdata/ocean_winds06/060203H.slw
  saving slow data as a raw slow data file: no
  writing data to a NetCDF file: yes
  writing data to a print out file (Green Bar Report): yes
  max bad slow records to read: 10000
  derive winds: yes, using attack angle/slip angle values:
    AAintercept 2.29764, AAslope 6.00460, SAintercept 0.10000, SAslope 6.74543
  making dynamicCorrections: yes for ambient temps and winds
  name of channel in ADC file for static pressure for the derived fields: psf
  name of channel in ADC file for dynamic pressure for the derived fields: pqf1

The ADC file "/acdata/ocean_winds06/n42_ocwnds06.adc" was read, then
the ADC list was written to an ASCII file and
to a PostScript file (with the system command "mpage").

aircraft_id:  42


Start Date/Time: 2006/02/03 194211
Time source: "micro"

Reading slow tape image from disk file
/acdata/ocean_winds06/060203H.slw . . .


Raw disk file summary:
  9156400 bytes read
  equivalent to 2081 full tape records


Start Date/Time: 2006/02/03 194211; End Date/Time: 2006/02/04 012900

The data was read from the raw data file successfully.

The parameter file did not specify a date/time window so all
the valid slow data records that were read will be utilized.


Raw slow data will NOT be saved to a file.

Data written to a NetCDF file.
The Green Bar Report was written to the ASCII file
"/acdata//ocean_winds06/060203H/060203H.list"
and to a PostScript file (with system command "mpage").

The end time is Tue Feb 07 23:53:21 2006 UTC.

Run time was 11 seconds.