Program apassn, Version 2.0 <21 October 2004 09:45:00><MDT>

The start time is Wed Dec 08 18:41:57 2004 UTC.

Using parameter file 041122I.par which specified:
  time source: micro
  project name: ine_test
  nominal flight date: 2004/11/22
  aircraft: 43
  directory name for files: /acdata/2004//ine_test/041122I/
  ADC file name: /home/acdata/adc/2004/N43_hur04.adc
  keeping all of flight's slow data: True
  slow data source: file /acdata/2004/ine_test/041122I/041122I.slw
  saving slow data as a raw slow data file: yes
  writing data to a NetCDF file: yes
  writing data to a print out file (Green Bar Report): yes
  max bad slow records to read: 10000
  derive winds: yes, using attack angle/slip angle values:
    AAintercept 0.87511, AAslope 5.98502, SAintercept 0.00000, SAslope 0.50000
  making dynamicCorrections: yes for ambient temps and winds
  name of channel in ADC file for static pressure for the derived fields: psf
  name of channel in ADC file for dynamic pressure for the derived fields: pqf1

The ADC file "/home/acdata/adc/2004/N43_hur04.adc" was read, then
the ADC list was written to an ASCII file and
to a PostScript file (with the system command "mpage").

aircraft_id:  43


Start Date/Time: 2004/11/22 142501
Time source: "micro"

Reading slow tape image from disk file
/acdata/2004/ine_test/041122I/041122I.slw . . .


Raw disk file summary:
  5024800 bytes read
  equivalent to 1142 full tape records


Start Date/Time: 2004/11/22 142501; End Date/Time: 2004/11/22 173520

The data was read from the raw data file successfully.

The parameter file did not specify a date/time window so all
the valid slow data records that were read will be utilized.

The writing of the raw data was successful.

Data written to a NetCDF file.

The Green Bar Report was written to the ASCII file
"/acdata/2004//ine_test/041122I/041122I.list"
and to a PostScript file (with system command "mpage").

The end time is Wed Dec 08 18:42:08 2004 UTC.


Run time was 11 seconds.